FPGA Central - World's 1st FPGA / CPLD Portal

FPGA Central

World's 1st FPGA Portal


Go Back   FPGA Groups > NewsGroup > VHDL

VHDL comp.lang.vhdl newsgroup / Usenet

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-09-2012, 08:03 AM
Join Date: Jul 2009
Posts: 44
Default a self study project VHDL + specman

Based on a VHDL simple UART, I created a small verification eVC.
The DUT was first tested, using GHDL and the VHDL code and scripts can be taken from this location - UART DUT

This project consists of three main parts. Unit level check for the UART TX and RX. Then the DUT RX and TX are connected and tested. The later reuses both RX and TX eVC(s).
It is shown how to connect and configure the two separate eVC(s) in the full chip environment.

If you would like to be notified on any changes done on this project, please send me an email. Put UART specman in the mail subject....
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to compile the specman code and the VHDL DUT pini_7 VHDL 0 04-26-2010 09:07 AM
specman code using a VHDL DUT pini_7 VHDL 0 04-22-2010 09:15 AM
specman code using a VHDL DUT pini_7 Verilog 0 04-21-2010 07:02 AM
looking for someone to help on this specman project pini_7 VHDL 0 04-05-2010 10:15 AM
specman with a real DUT diploma project pini_7 Verilog 0 04-03-2010 09:00 AM

All times are GMT +1. The time now is 08:58 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright 2008 @ FPGA Central. All rights reserved