FPGA Central - World's 1st FPGA / CPLD Portal

FPGA Central

World's 1st FPGA Portal

 

Go Back   FPGA Groups > NewsGroup > FPGA

FPGA comp.arch.fpga newsgroup (usenet)

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11-02-2007, 04:40 AM
Xilinx User
Guest
 
Posts: n/a
Default Xilinx EDK and Windows Vista?

I noticed that Xilinx EDK 9.1 can be installed on Windows Vista (32-bit
only),
but it requires Xilinx ISE 9.1i, which isn't compatible with Vista at all.

Is there a timetable for EDK support or planned support for Vista
(32/64-bit)?


Reply With Quote
  #2 (permalink)  
Old 11-02-2007, 05:28 PM
Guest
 
Posts: n/a
Default Re: Xilinx EDK and Windows Vista?

On Nov 1, 8:40 pm, "Xilinx User" <[email protected]> wrote:
> I noticed that Xilinx EDK 9.1 can be installed on Windows Vista (32-bit
> only),
> but it requires Xilinx ISE 9.1i, which isn't compatible with Vista at all.
>
> Is there a timetable for EDK support or planned support for Vista
> (32/64-bit)?


The answer *should* be on this page: <http://www.xilinx.com/ise/
ossupport/index.htm>. But it's not.

I always get quite grumpy when the EDK version lags the ISE version
significantly.

I've never seen the "other guy" do that. Nudge, nudge.

Reply With Quote
  #3 (permalink)  
Old 11-02-2007, 05:50 PM
Guest
 
Posts: n/a
Default Re: Xilinx EDK and Windows Vista?

ISE 9.2i supports Vista32, so you'll have to use EDK 9.2.

Our release in Q1 of next year will release all tools at the same time
(ISE, EDK, Sysgen, AccelDSP, PlanAhead, ChipScope, MIG).

Steve

<[email protected]> wrote in message
news:[email protected] ps.com...
> On Nov 1, 8:40 pm, "Xilinx User" <[email protected]> wrote:
>> I noticed that Xilinx EDK 9.1 can be installed on Windows Vista (32-bit
>> only),
>> but it requires Xilinx ISE 9.1i, which isn't compatible with Vista at
>> all.
>>
>> Is there a timetable for EDK support or planned support for Vista
>> (32/64-bit)?

>
> The answer *should* be on this page: <http://www.xilinx.com/ise/
> ossupport/index.htm>. But it's not.
>
> I always get quite grumpy when the EDK version lags the ISE version
> significantly.
>
> I've never seen the "other guy" do that. Nudge, nudge.
>



Reply With Quote
  #4 (permalink)  
Old 11-02-2007, 06:26 PM
Dave
Guest
 
Posts: n/a
Default Re: Xilinx EDK and Windows Vista?

On Nov 2, 12:50 pm, <[email protected]> wrote:
> ISE 9.2i supports Vista32, so you'll have to use EDK 9.2.
>
> Our release in Q1 of next year will release all tools at the same time
> (ISE, EDK, Sysgen, AccelDSP, PlanAhead, ChipScope, MIG).
>
> Steve
>
> <[email protected]> wrote in message
>
> news:[email protected] ps.com...
>
>
>
> > On Nov 1, 8:40 pm, "Xilinx User" <[email protected]> wrote:
> >> I noticed that Xilinx EDK 9.1 can be installed on Windows Vista (32-bit
> >> only),
> >> but it requires Xilinx ISE 9.1i, which isn't compatible with Vista at
> >> all.

>
> >> Is there a timetable for EDK support or planned support for Vista
> >> (32/64-bit)?

>
> > The answer *should* be on this page: <http://www.xilinx.com/ise/
> > ossupport/index.htm>. But it's not.

>
> > I always get quite grumpy when the EDK version lags the ISE version
> > significantly.

>
> > I've never seen the "other guy" do that. Nudge, nudge.- Hide quoted text -

>
> - Show quoted text -


When is EDK 9.2 supposed to be released? I had heard October, but
WebUpdate still tells me that there are no updates right now
(currently using ISE 9.1 nad EDK 9.1)

Reply With Quote
  #5 (permalink)  
Old 11-02-2007, 08:55 PM
Guest
 
Posts: n/a
Default Re: Xilinx EDK and Windows Vista?

EDK 9.2 is being released today.

"Dave" <[email protected]> wrote in message
news:[email protected] ps.com...

> When is EDK 9.2 supposed to be released? I had heard October, but
> WebUpdate still tells me that there are no updates right now
> (currently using ISE 9.1 nad EDK 9.1)
>



Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does Modelsim work under Windows Vista? Helpme FPGA 3 09-29-2007 07:34 PM
Does Modelsim work under Windows Vista? Helpme Verilog 3 09-29-2007 07:34 PM
vista 64 bits christophe ALEXANDRE FPGA 4 07-08-2007 05:11 PM
NIOS2 GNU tools under Windows Vista [email protected] FPGA 0 05-16-2007 12:47 PM
comp.unix.cray,comp.windows.garnet,comp.os.ms-windows.programmer.winhelp,comp.os.ms-windows.networking.tcp-ip,comp.lang.verilog . Verilog 0 06-19-2004 09:15 AM


All times are GMT +1. The time now is 03:07 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright 2008 @ FPGA Central. All rights reserved