FPGA Central - World's 1st FPGA / CPLD Portal

FPGA Central

World's 1st FPGA Portal

 

Go Back   FPGA Groups > NewsGroup > FPGA

FPGA comp.arch.fpga newsgroup (usenet)

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 06-03-2009, 08:11 PM
maxascent
Guest
 
Posts: n/a
Default Secure netlist

How would I create a create a secure netlist that I could give to a 3r
party. Ideally I would like the edif output from Synplify but in
protected form.

Cheers

Jon
Reply With Quote
  #2 (permalink)  
Old 06-03-2009, 08:18 PM
Mike Treseler
Guest
 
Posts: n/a
Default Re: Secure netlist

maxascent wrote:
> How would I create a create a secure netlist that I could give to a 3rd
> party. Ideally I would like the edif output from Synplify but in a
> protected form.



http://download.cnet.com/windows/encryption-software/
Reply With Quote
  #3 (permalink)  
Old 06-03-2009, 08:37 PM
Muzaffer Kal
Guest
 
Posts: n/a
Default Re: Secure netlist

On Wed, 03 Jun 2009 13:11:59 -0500, "maxascent"
<[email protected]> wrote:

>How would I create a create a secure netlist that I could give to a 3rd
>party. Ideally I would like the edif output from Synplify but in a
>protected form.


What do you want the 3rd party to be able to do with this netlist? If
you need them to be able to use it in any form other than storing it,
you need to encyrpt it with the tool which will be used in that
process. Ie, if you want them to be able to simulate it, you encrypt
it with the target simulator so only that simulator can un-encrypt it.
--
Muzaffer Kal

DSPIA INC.
ASIC/FPGA Design Services

http://www.dspia.com
Reply With Quote
  #4 (permalink)  
Old 06-04-2009, 11:54 AM
maxascent
Guest
 
Posts: n/a
Default Re: Secure netlist

What I would like is the 3rd party top be able to use the netlist in thei
design and then place and route it. I know that xilinx do it with thei
encrypted NGC file.

Jon
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Easy and Secure Remote Access GoToMyPC Newsletter 0 05-20-2009 05:06 PM
Anyway to secure a Xilinx NGC file ? fpganut FPGA 6 05-12-2008 04:47 PM
secure a module Rob Verilog 10 03-15-2008 07:45 AM
Datasheet on Micron's secure products Enzo B. FPGA 4 03-08-2008 08:07 PM
How to secure distributed IP for Xilinx FPGAs? Paul Urbanus FPGA 0 01-11-2005 12:22 AM


All times are GMT +1. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright 2008 @ FPGA Central. All rights reserved