FPGA Central - World's 1st FPGA / CPLD Portal

FPGA Central

World's 1st FPGA Portal

 

Go Back   FPGA Groups > NewsGroup > FPGA

FPGA comp.arch.fpga newsgroup (usenet)

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12-16-2005, 05:06 PM
Guest
 
Posts: n/a
Default How to simulate Virtex-4 PPC, MAC, etc. ?

Hello! Having finished a board design with a Virtex-4FX and with
promising leads on the silicon, I sat down to begin my HDL coding...
when I discovered that the simulation models for the Virtex-4 PPC and
MAC components are only available in encrypted form. After poking
around a bit on the net and usenet, it seems that only the really
high-end simulators can support these encrypted models. Has anyone
found an inexpensive HDL simulator which supports these encrypted
models, or any other way to design with the cool features of the Virtex
2-pro and Virtex-4FX?

Thanks,
...Eric

Reply With Quote
  #2 (permalink)  
Old 12-16-2005, 08:56 PM
Antti Lukats
Guest
 
Posts: n/a
Default Re: How to simulate Virtex-4 PPC, MAC, etc. ?

<[email protected]> schrieb im Newsbeitrag
news:[email protected] oups.com...
> Hello! Having finished a board design with a Virtex-4FX and with
> promising leads on the silicon, I sat down to begin my HDL coding...
> when I discovered that the simulation models for the Virtex-4 PPC and
> MAC components are only available in encrypted form. After poking
> around a bit on the net and usenet, it seems that only the really
> high-end simulators can support these encrypted models. Has anyone
> found an inexpensive HDL simulator which supports these encrypted
> models, or any other way to design with the cool features of the Virtex
> 2-pro and Virtex-4FX?
>
> Thanks,
> ...Eric
>


the only low cost thing is... the silicon itself, set the stuff up and load
into the FPGA together with ChipScope and test it out

Antti


Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to simulate a .NMC macro? john FPGA 3 12-15-2005 03:13 PM
how to simulate verilog with rom in modelsim? seanzhang Verilog 6 09-11-2004 02:35 AM
so nobody knows how to simulate Rocket IO using Active HDL ? Adarsh Kumar Jain FPGA 0 01-16-2004 06:20 PM
please help, modelsim does not simulate Simone Winkler FPGA 4 10-21-2003 11:10 PM


All times are GMT +1. The time now is 01:48 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright 2008 @ FPGA Central. All rights reserved