FPGA Central - World's 1st FPGA / CPLD Portal

FPGA Central

World's 1st FPGA Portal

 

Go Back   FPGA Groups > NewsGroup > FPGA

FPGA comp.arch.fpga newsgroup (usenet)

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-16-2010, 08:10 AM
Antti
Guest
 
Posts: n/a
Default EDK 11,1 on Windows 7, 32 Bit

Hi

my co-worker has a problem with EDK (used on w7, 32bit)
OLD project can be built but any new projexcts created stop
during implementation

xilinx claims that the following table
http://www.xilinx.com/ise/ossupport/index.htm

is UPTODATE OS support list for Xilinx tools, in that table win7 is
missing

so what is wrong? is there something wrong with the installation, but
hey
why then old projects pass full flow?

any ideas?

Antti


Reply With Quote
  #2 (permalink)  
Old 02-16-2010, 06:21 PM
Ed McGettigan
Guest
 
Posts: n/a
Default Re: EDK 11,1 on Windows 7, 32 Bit

On Feb 15, 11:10*pm, Antti <[email protected]> wrote:
> Hi
>
> my co-worker has a problem with EDK (used on w7, 32bit)
> OLD project can be built but any new projexcts created stop
> during implementation
>
> xilinx claims that the following tablehttp://www.xilinx.com/ise/ossupport/index.htm
>
> is UPTODATE OS support list for Xilinx tools, in that table win7 is
> missing
>
> so what is wrong? is there something wrong with the installation, but
> hey
> why then old projects pass full flow?
>
> any ideas?
>
> Antti


Win7 isn't a supported OS for ISE tools and it is not listed in the
table.

The tools may work under some conditions, but they likely will not
under all conditions as your co-worker found out.

Ed McGettigan
--
Xilinx Inc.

Reply With Quote
  #3 (permalink)  
Old 02-16-2010, 08:54 PM
maxascent
Guest
 
Posts: n/a
Default Re: EDK 11,1 on Windows 7, 32 Bit

Have you tried running ISE using Windows 7 compatibilty mode. I found tha
some of the programs that I used to run in XP wouldnt run in 7 unless
used the compatibility mode.

Jon

---------------------------------------
Posted through http://www.FPGARelated.com
Reply With Quote
  #4 (permalink)  
Old 02-17-2010, 06:10 AM
Antti
Guest
 
Posts: n/a
Default Re: EDK 11,1 on Windows 7, 32 Bit

On Feb 16, 7:21*pm, Ed McGettigan <[email protected]> wrote:
> On Feb 15, 11:10*pm, Antti <[email protected]> wrote:
>
>
>
>
>
> > Hi

>
> > my co-worker has a problem with EDK (used on w7, 32bit)
> > OLD project can be built but any new projexcts created stop
> > during implementation

>
> > xilinx claims that the following tablehttp://www.xilinx.com/ise/ossupport/index.htm

>
> > is UPTODATE OS support list for Xilinx tools, in that table win7 is
> > missing

>
> > so what is wrong? is there something wrong with the installation, but
> > hey
> > why then old projects pass full flow?

>
> > any ideas?

>
> > Antti

>
> Win7 isn't a supported OS for ISE tools and it is not listed in the
> table.
>
> The tools may work under some conditions, but they likely will not
> under all conditions as your co-worker found out.
>
> Ed McGettigan
> --
> Xilinx Inc.


Hi

and thanks for clarification, I could not belive the table to be
accurate
as of today everybody DOES support w7 already ok maybe not
all companies do, but most other software does run nicely on w7

Antti

Reply With Quote
  #5 (permalink)  
Old 02-17-2010, 08:47 AM
Ed McGettigan
Guest
 
Posts: n/a
Default Re: EDK 11,1 on Windows 7, 32 Bit

On Feb 16, 9:10*pm, Antti <[email protected]> wrote:
> On Feb 16, 7:21*pm, Ed McGettigan <[email protected]> wrote:
>
>
>
>
>
> > On Feb 15, 11:10*pm, Antti <[email protected]> wrote:

>
> > > Hi

>
> > > my co-worker has a problem with EDK (used on w7, 32bit)
> > > OLD project can be built but any new projexcts created stop
> > > during implementation

>
> > > xilinx claims that the following tablehttp://www.xilinx.com/ise/ossupport/index.htm

>
> > > is UPTODATE OS support list for Xilinx tools, in that table win7 is
> > > missing

>
> > > so what is wrong? is there something wrong with the installation, but
> > > hey
> > > why then old projects pass full flow?

>
> > > any ideas?

>
> > > Antti

>
> > Win7 isn't a supported OS for ISE tools and it is not listed in the
> > table.

>
> > The tools may work under some conditions, but they likely will not
> > under all conditions as your co-worker found out.

>
> > Ed McGettigan
> > --
> > Xilinx Inc.

>
> Hi
>
> and thanks for clarification, I could not belive the table to be
> accurate
> as of today everybody DOES support w7 already ok maybe not
> all companies do, but most other software does run nicely on w7
>
> Antti- Hide quoted text -
>
> - Show quoted text -


ISE 11.1 was released in April while Windows 7 wasn't released until
October.

While smaller companies and academia tend to move faster with Windows
OS upgrades as the tend to use the OS sold with the PC/Laptop larger
companies in constrast don't rapidly upgrade the OS and prefer to stay
with older, stable versions.

A quick survey of other EDA tools shows

Synopsys Synplify Pro - Win XP, Win Vista, Linux, Solaris
Mentor ModelSim PE - Win XP, Win Vista (32)
Mentor ModelSim SE - Win XP, Win Vista (32), Linux (32)
Mentor ModelSim DE - Win XP, Win Vista (32/64), Linux (32/64), Solaris
(32/64)
Altera Quatrus II 9.1 - Win XP, Win Vista, Red Hat 4/5, Suse 9/10,
CentOS 4/5
Lattice ispLever - Win 2K, Win XP, Win Vista (32), Red hat 3/4, Suse
10, Solaris 2.8/10
Actel Libero - Win XP, Win Vista, Red Hat WS 4/5.2

Ed McGettigan
--
Xilinx Inc.
Reply With Quote
  #6 (permalink)  
Old 02-17-2010, 02:18 PM
Antti
Guest
 
Posts: n/a
Default Re: EDK 11,1 on Windows 7, 32 Bit

On Feb 17, 9:47*am, Ed McGettigan <[email protected]> wrote:
> On Feb 16, 9:10*pm, Antti <[email protected]> wrote:
>
>
>
>
>
> > On Feb 16, 7:21*pm, Ed McGettigan <[email protected]> wrote:

>
> > > On Feb 15, 11:10*pm, Antti <[email protected]> wrote:

>
> > > > Hi

>
> > > > my co-worker has a problem with EDK (used on w7, 32bit)
> > > > OLD project can be built but any new projexcts created stop
> > > > during implementation

>
> > > > xilinx claims that the following tablehttp://www.xilinx.com/ise/ossupport/index.htm

>
> > > > is UPTODATE OS support list for Xilinx tools, in that table win7 is
> > > > missing

>
> > > > so what is wrong? is there something wrong with the installation, but
> > > > hey
> > > > why then old projects pass full flow?

>
> > > > any ideas?

>
> > > > Antti

>
> > > Win7 isn't a supported OS for ISE tools and it is not listed in the
> > > table.

>
> > > The tools may work under some conditions, but they likely will not
> > > under all conditions as your co-worker found out.

>
> > > Ed McGettigan
> > > --
> > > Xilinx Inc.

>
> > Hi

>
> > and thanks for clarification, I could not belive the table to be
> > accurate
> > as of today everybody DOES support w7 already ok maybe not
> > all companies do, but most other software does run nicely on w7

>
> > Antti- Hide quoted text -

>
> > - Show quoted text -

>
> ISE 11.1 was released in April while Windows 7 wasn't released until
> October.
>
> While smaller companies and academia tend to move faster with Windows
> OS upgrades as the tend to use the OS sold with the PC/Laptop larger
> companies in constrast don't rapidly upgrade the OS and prefer to stay
> with older, stable versions.
>
> A quick survey of other EDA tools shows
>
> Synopsys Synplify Pro - Win XP, Win Vista, Linux, Solaris
> Mentor ModelSim PE - Win XP, Win Vista (32)
> Mentor ModelSim SE - Win XP, Win Vista (32), Linux (32)
> Mentor ModelSim DE - Win XP, Win Vista (32/64), Linux (32/64), Solaris
> (32/64)
> Altera Quatrus II 9.1 - Win XP, Win Vista, Red Hat 4/5, Suse 9/10,
> CentOS 4/5
> Lattice ispLever - Win 2K, Win XP, Win Vista (32), Red hat 3/4, Suse
> 10, Solaris 2.8/10
> Actel Libero - Win XP, Win Vista, Red Hat WS 4/5.2
>
> Ed McGettigan
> --
> Xilinx Inc.


We already have 11.4 tools

ok, the situation is not that bad, EDK 11.3 failed on W7/64
but worked somewhat on W7/32 (after some tweaking)
we still may need another vista machine as the client reqests EDK 10.x

Antti






Reply With Quote
  #7 (permalink)  
Old 02-18-2010, 10:53 AM
Antti
Guest
 
Posts: n/a
Default Re: EDK 11,1 on Windows 7, 32 Bit

On Feb 17, 9:47*am, Ed McGettigan <[email protected]> wrote:
> On Feb 16, 9:10*pm, Antti <[email protected]> wrote:
>
>
>
>
>
> > On Feb 16, 7:21*pm, Ed McGettigan <[email protected]> wrote:

>
> > > On Feb 15, 11:10*pm, Antti <[email protected]> wrote:

>
> > > > Hi

>
> > > > my co-worker has a problem with EDK (used on w7, 32bit)
> > > > OLD project can be built but any new projexcts created stop
> > > > during implementation

>
> > > > xilinx claims that the following tablehttp://www.xilinx.com/ise/ossupport/index.htm

>
> > > > is UPTODATE OS support list for Xilinx tools, in that table win7 is
> > > > missing

>
> > > > so what is wrong? is there something wrong with the installation, but
> > > > hey
> > > > why then old projects pass full flow?

>
> > > > any ideas?

>
> > > > Antti

>
> > > Win7 isn't a supported OS for ISE tools and it is not listed in the
> > > table.

>
> > > The tools may work under some conditions, but they likely will not
> > > under all conditions as your co-worker found out.

>
> > > Ed McGettigan
> > > --
> > > Xilinx Inc.

>
> > Hi

>
> > and thanks for clarification, I could not belive the table to be
> > accurate
> > as of today everybody DOES support w7 already ok maybe not
> > all companies do, but most other software does run nicely on w7

>
> > Antti- Hide quoted text -

>
> > - Show quoted text -

>
> ISE 11.1 was released in April while Windows 7 wasn't released until
> October.
>
> While smaller companies and academia tend to move faster with Windows
> OS upgrades as the tend to use the OS sold with the PC/Laptop larger
> companies in constrast don't rapidly upgrade the OS and prefer to stay
> with older, stable versions.
>
> A quick survey of other EDA tools shows
>
> Synopsys Synplify Pro - Win XP, Win Vista, Linux, Solaris
> Mentor ModelSim PE - Win XP, Win Vista (32)
> Mentor ModelSim SE - Win XP, Win Vista (32), Linux (32)
> Mentor ModelSim DE - Win XP, Win Vista (32/64), Linux (32/64), Solaris
> (32/64)
> Altera Quatrus II 9.1 - Win XP, Win Vista, Red Hat 4/5, Suse 9/10,
> CentOS 4/5
> Lattice ispLever - Win 2K, Win XP, Win Vista (32), Red hat 3/4, Suse
> 10, Solaris 2.8/10
> Actel Libero - Win XP, Win Vista, Red Hat WS 4/5.2
>
> Ed McGettigan
> --
> Xilinx Inc.


EASY

actually to the final surprise EDK 10.x worked well on Win7/32

so it ended up ok, no need to buy old PC's to run 10.x versions of the
tools

Antti



Reply With Quote
  #8 (permalink)  
Old 02-22-2010, 11:36 AM
Maik H.
Guest
 
Posts: n/a
Default Re: EDK 11,1 on Windows 7, 32 Bit

Am 17.02.2010 08:47, schrieb Ed McGettigan:
> On Feb 16, 9:10 pm, Antti <[email protected]> wrote:
>> On Feb 16, 7:21 pm, Ed McGettigan <[email protected]> wrote:
>>
>>
>>
>>
>>
>>> On Feb 15, 11:10 pm, Antti <[email protected]> wrote:

>>
>>>> Hi

>>
>>>> my co-worker has a problem with EDK (used on w7, 32bit)
>>>> OLD project can be built but any new projexcts created stop
>>>> during implementation

>>
>>>> xilinx claims that the following tablehttp://www.xilinx.com/ise/ossupport/index.htm

>>
>>>> is UPTODATE OS support list for Xilinx tools, in that table win7 is
>>>> missing

>>
>>>> so what is wrong? is there something wrong with the installation, but
>>>> hey
>>>> why then old projects pass full flow?

>>
>>>> any ideas?

>>
>>>> Antti

>>
>>> Win7 isn't a supported OS for ISE tools and it is not listed in the
>>> table.

>>
>>> The tools may work under some conditions, but they likely will not
>>> under all conditions as your co-worker found out.

>>
>>> Ed McGettigan
>>> --
>>> Xilinx Inc.

>>
>> Hi
>>
>> and thanks for clarification, I could not belive the table to be
>> accurate
>> as of today everybody DOES support w7 already ok maybe not
>> all companies do, but most other software does run nicely on w7
>>
>> Antti- Hide quoted text -
>>
>> - Show quoted text -

>
> ISE 11.1 was released in April while Windows 7 wasn't released until
> October.
>
> While smaller companies and academia tend to move faster with Windows
> OS upgrades as the tend to use the OS sold with the PC/Laptop larger
> companies in constrast don't rapidly upgrade the OS and prefer to stay
> with older, stable versions.
>
> A quick survey of other EDA tools shows
>
> Synopsys Synplify Pro - Win XP, Win Vista, Linux, Solaris
> Mentor ModelSim PE - Win XP, Win Vista (32)
> Mentor ModelSim SE - Win XP, Win Vista (32), Linux (32)
> Mentor ModelSim DE - Win XP, Win Vista (32/64), Linux (32/64), Solaris
> (32/64)
> Altera Quatrus II 9.1 - Win XP, Win Vista, Red Hat 4/5, Suse 9/10,
> CentOS 4/5
> Lattice ispLever - Win 2K, Win XP, Win Vista (32), Red hat 3/4, Suse
> 10, Solaris 2.8/10
> Actel Libero - Win XP, Win Vista, Red Hat WS 4/5.2
>
> Ed McGettigan
> --
> Xilinx Inc.


Hi,
since there is no native Win7 support in the 11.x toolchain, will it be
in 12.x? If so, could you please give us a rough periode when it will be
released?

--

Regards,
Maik
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windows XP management [email protected] DSP 0 10-19-2007 12:15 AM
windows xp networking, please help? [email protected] FPGA 0 09-27-2006 06:35 PM
windows xp networking, please help? [email protected] FPGA 0 09-27-2006 06:33 PM
FFT windows Jens Hee DSP 3 05-10-2006 10:53 PM
comp.unix.cray,comp.windows.garnet,comp.os.ms-windows.programmer.winhelp,comp.os.ms-windows.networking.tcp-ip,comp.lang.verilog . Verilog 0 06-19-2004 10:15 AM


All times are GMT +1. The time now is 10:05 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright 2008 @ FPGA Central. All rights reserved