FPGA Central - World's 1st FPGA / CPLD Portal

FPGA Central

World's 1st FPGA Portal

 

Go Back   FPGA Groups > NewsGroup > DSP

DSP comp.dsp newsgroup, mailing list

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-05-2003, 07:10 AM
wong
Guest
 
Posts: n/a
Default Frame sync for OFDM under multipath environment

Hi
Would like to know how to do frame synchronization in OFDM systems.
Seems like many folks like to correlate a copy of what is received
with a delayed copy of itself, but this method is not robust esp in
the presence of multipath. What is the best way?
Thanks all.
Reply With Quote
  #2 (permalink)  
Old 09-05-2003, 06:13 PM
santosh nath
Guest
 
Posts: n/a
Default Re: Frame sync for OFDM under multipath environment

[email protected] (wong) wrote in message news:<[email protected] com>...
> Hi
> Would like to know how to do frame synchronization in OFDM systems.
> Seems like many folks like to correlate a copy of what is received
> with a delayed copy of itself, but this method is not robust esp in
> the presence of multipath. What is the best way?
> Thanks all.


If you use double correlation method it will improve against
multipath.
In one correlation,
you calculate cross correlation using known short preambles and find
the
peaks(Fine time sync.)

Another you do auto correlation(Coarse sync.) of received samples
with its delayed copy.
This one will give plateau. You have take a joint decision point based
on both
correlations.

Look at Cox's Paper.
Regards,
Santosh
Reply With Quote
  #3 (permalink)  
Old 09-09-2003, 09:22 AM
x-guy
Guest
 
Posts: n/a
Default Re: Frame sync for OFDM under multipath environment

> Seems like many folks like to correlate a copy of what is received
> with a delayed copy of itself, but this method is not robust esp in
> the presence of multipath.



Who told you that? It is easy to see that without other impairments, delay
correlation will cancel channel effect! Write down some equations and you
should see why!


Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
frame length, frame addressing ? hurjy FPGA 3 03-03-2004 04:40 PM
Questions about OFDM pozz DSP 5 09-03-2003 03:26 PM
How to get V-Sync and H-Sync signals using 74ACT715-R TBird DSP 1 08-21-2003 09:58 PM
Re: EDMA transfer problem, with external frame sync. Barry DSP 0 07-29-2003 09:47 PM


All times are GMT +1. The time now is 05:01 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright 2008 @ FPGA Central. All rights reserved