View Single Post
  #2 (permalink)  
Old 11-27-2007, 07:01 PM
Philipp
Guest
 
Posts: n/a
Default Re: Xilinx Multilink Connection not working

Alright, at least the multilinx cable is working, so the LED flashes. I
connected the GND, VCC, TDO, TDI, TCK and TMS. Still I cant get a
connection over the serial port which is quite weird.
I used automatic detection but I get the following error blog from
Impact. Is there an issue with the drivers? In addition, I use two DB25
adapters in order to connect the cable to the board. Shouldnt be an
issue either, is that correct?

iMPACT Version: H.38
iMPACT log file started on 2007/11/27 17:22:31
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevelETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevelETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
GUI --- Boundary-Scan Mode selected
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
CB_PROGRESS_START - Starting Operation.
Connecting to cable (USB Port).
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. LPT base address = 0378h.
ECP base address = 0778h.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0.Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0.Cable connection failed.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0.Cable connection failed.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
File C:\WINDOWS\system32\drivers\xusbdfwu.sys not found.
Driver file not found. Inf file version = 0.
Driver xusbdfwu.sys version: 1017 (2001).
Driver windrvr6.sys version = 8.1.1.0.Cable connection failed.
Connecting to cable (COM1 Port).
Cable connection failed.
Cable connection failed.
Cable connection failed.
Cable connection failed.
CB_PROGRESS_END - End Operation.
Elapsed time = 16 sec.
Cable autodetection failed.
***** Closing iMPACT program. *****
Reply With Quote