View Single Post
  #1 (permalink)  
Old 10-31-2007, 05:46 PM
bhb
Guest
 
Posts: n/a
Default Spartan-3E display developpement kit

Hello,

I 'm trying to use the Spartan-3E display developpement kit.

I can program the FPGA with JTAG ( file.bit in direct), and the PROM (XCF
08P) with JTAG (file.mcs).

But after an On/OFF, the FPGA is not programmed (no programmation between
PROM -> SPARTAN).

Could you help me to have the good config switch (M2,M1,M0 etc...) on the
board,
and the config of IMPACT software (master or slave, internal or external
clock, etc...).

I 'm using ISE 9.1.03i for IMPACT.

Thanks in advance.
Regards,

Bhb.


Reply With Quote