FPGA Central

Hi,
In the board which i am doing the crosstalk analysis, has 2 traces which
are running parallel for say, "X" inches. The First trace is a power trace
which is 28V AC and Max Current on the trace is 2 A, and the proximity
trace seperated by "S" mils is the signal trace which I am interested in.
Inorder to measure the near and far end crosstalk on the signal trace in
the frequency domian, How should I model the source and load in PSpice?

Thanks,
RA


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request (AT) freelists (DOT) org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request (AT) freelists (DOT) org with 'help' in the Subject field


List technical documents are available at:
http://www.si-list.net

List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu

Hi Raja,

I suppose below documents help to you for PSpice.
http://w2.cadence.com/appnotes/Trans...nsInPSpice.pdf
http://www.spicemodel.com/technotes/...ssionlines.pdf

You can easily simulate to coupling effect of AC or DC power lines on
transmission line in Allegro SigXP or Hyperlynx or another tools.

Regards,

FERHAT YALDIZ
HARDWARE DESIGN ENG.
TUBITAK



-----Original Message-----
From: si-list-bounce (AT) freelists (DOT) org [mailto:si-list-bounce (AT) freelists (DOT) org] On
Behalf Of raja.anand (AT) gmail (DOT) com
Sent: Tuesday, April 07, 2009 3:11 PM
To: si-list (AT) freelists (DOT) org
Subject: [SI-LIST] Crosstalk between High power trace and digital signal

Hi,
In the board which i am doing the crosstalk analysis, has 2 traces which
are running parallel for say, "X" inches. The First trace is a power trace
which is 28V AC and Max Current on the trace is 2 A, and the proximity
trace seperated by "S" mils is the signal trace which I am interested in.
Inorder to measure the near and far end crosstalk on the signal trace in
the frequency domian, How should I model the source and load in PSpice?

Thanks,
RA


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request (AT) freelists (DOT) org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request (AT) freelists (DOT) org with 'help' in the Subject field


List technical documents are available at:
http://www.si-list.net

List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request (AT) freelists (DOT) org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request (AT) freelists (DOT) org with 'help' in the Subject field


List technical documents are available at:
http://www.si-list.net

List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu