FPGA Central

#1 (**permalink**) 12-14-2005, 10:14 AM

Just got the old PC from the storage of the lab which has ISE 4.2 installed.
I only need the PC to program Virtex 6000 and xc18v04, do I need to upgrade
to ISE 6 or above?

Thank you.

#2 (**permalink**) 12-14-2005, 02:19 PM

Frank wrote:
> Just got the old PC from the storage of the lab which has ISE 4.2 installed.
> I only need the PC to program Virtex 6000 and xc18v04, do I need to upgrade
> to ISE 6 or above?
>
> Thank you.

These devices are supported in Foundation 4.1i which I believe was
released
at the same time as ISE 4.2, so I would assume you can use it. If
you're
not using any legacy features (support for older devices or Aldec-based
schematics) though I would recommend updating.

#3 (**permalink**) 12-15-2005, 06:13 AM

"Gabor" <[email protected]> wrote in message
news:[email protected] oups.com...
>
> Frank wrote:
> > Just got the old PC from the storage of the lab which has ISE 4.2
installed.
> > I only need the PC to program Virtex 6000 and xc18v04, do I need to
upgrade
> > to ISE 6 or above?
> >
> > Thank you.
>
> These devices are supported in Foundation 4.1i which I believe was
> released
> at the same time as ISE 4.2, so I would assume you can use it. If
> you're
> not using any legacy features (support for older devices or Aldec-based
> schematics) though I would recommend updating.
>

Thank you Gabor.

FPGA Central

World's 1st FPGA Portal