FPGA Central

Hi ALL

I need an algorithm to generate pink noise (a drop of 20dB/decade) from
white noise (use in simulink) that is suitable for a frequency range of 1 to
100 Hz. Any suggestion is appreciated.

Regards

Karl

Actually, pink noise has a 10dB/decade drop-off.
See: http://www.firstpr.com.au/dsp/pink-noise/

"Karl" <[email protected]> wrote in message
news:4159e495$0$11918$[email protected]..
> Hi ALL
>
> I need an algorithm to generate pink noise (a drop of 20dB/decade) from
> white noise (use in simulink) that is suitable for a frequency range of 1 to
> 100 Hz. Any suggestion is appreciated.
>
> Regards
>
> Karl

Karl wrote:

> Hi ALL
>
> I need an algorithm to generate pink noise (a drop of 20dB/decade) from
> white noise (use in simulink) that is suitable for a frequency range of 1 to
> 100 Hz. Any suggestion is appreciated.
>
> Regards
>
> Karl

20 dB/decade is easy to generate; an integrater does that. It's not what
you want, however, but red noise. Pink noise is decreases at 10
dB/decade. There's a modestly amusing discussion of colored noise at
http://ccms.ntu.edu.tw/~karchung/Pho...%20sixteen.htm

Jerry

--
.... they proceeded on the sound principle that the magnitude of a lie
always contains a certain factor of credibility, ... and that therefor
.... they more easily fall victim to a big lie than to a little one ...
A. H.
—————————————————————————————————————————————————— —————————————————————

Karl,

If I remember correctly, when using the algorithm on the page mentioned
below, design the filter to run at a slow rate to get better precision. If
your rate is too high, your filter is pretty sloppy. You can interpolate
the output of the filter to the rate needed and then add it to any AWGN that
may also be present.

I think that I found a flicker noise block on the web somewhere (in
simulink). I'll post the URL if I find it. I'll also post a link to the
paper that addresses algorithm if I find it.

Regards,
Phil

"Jon Harris" <[email protected]> wrote in message
news:[email protected]..
> Actually, pink noise has a 10dB/decade drop-off.
> See: http://www.firstpr.com.au/dsp/pink-noise/
>
> "Karl" <[email protected]> wrote in message
> news:4159e495$0$11918$[email protected]..
> > Hi ALL
> >
> > I need an algorithm to generate pink noise (a drop of 20dB/decade) from
> > white noise (use in simulink) that is suitable for a frequency range of
1 to
> > 100 Hz. Any suggestion is appreciated.
> >
> > Regards
> >
> > Karl
>
>

"Phil" <phil_simulink@(NOSPAM)sympatico.ca> wrote in message news:<Njm9d.33273$[email protected] m>...
> Karl,
>
> If I remember correctly, when using the algorithm on the page mentioned
> below, design the filter to run at a slow rate to get better precision. If
> your rate is too high, your filter is pretty sloppy. You can interpolate
> the output of the filter to the rate needed and then add it to any AWGN that
> may also be present.
>
> I think that I found a flicker noise block on the web somewhere (in
> simulink). I'll post the URL if I find it. I'll also post a link to the
> paper that addresses algorithm if I find it.
>
> Regards,
> Phil
>
> "Jon Harris" <[email protected]> wrote in message
> news:[email protected]..
> > Actually, pink noise has a 10dB/decade drop-off.
> > See: http://www.firstpr.com.au/dsp/pink-noise/
> >
> > "Karl" <[email protected]> wrote in message
> > news:4159e495$0$11918$[email protected]..
> > > Hi ALL
> > >
> > > I need an algorithm to generate pink noise (a drop of 20dB/decade) from
> > > white noise (use in simulink) that is suitable for a frequency range of
> 1 to
> > > 100 Hz. Any suggestion is appreciated.
> > >
> > > Regards
> > >
> > > Karl
> >
> >

There is a contributed library on the Mathworks site that contains a
flicker noise model.

http://www.mathworks.com/matlabcentr...bjectType=file

The flicker noise is in the Nonidealities library in rf.mdl.

The block description contains a reference to the paper from which the
basic algorithm is derived.

Regards,
Phil