In article <
[email protected]>,
Mark <
[email protected]> wrote:
>On May 26, 10:55=A0am, Richard Owlett <rowl...@atlascomm.net> wrote:
>> gpaine wrote:
>> > I am preparing to transfer several dozen audio cassettes to .wav files. =
>My
>> > cassette deck is slightly out of electronic alignment--enough for the
>> > misalignment to be audible.
>>
>> > I am trying to locate a 200 nWm/m cassette to calibrate the meters and
>> > Dolby level prior to making the other necessary adjustments.
>>
>> > Any idea where I might obtain one that does not cost a fortune?
>>
>> http://www.google.com/search?q=3D%22...ration+tape%22
>> Gives 60 hits. Some may be useful.
>> HTH
>
>cross posted to rec.audio.pro
Tascam sells one for the Tascam 122, which I recommend for use with almost
any cassette deck. They actually sell dozens of kinds, but the 122 one is
good.
HOWEVER, the problem you have has to do with the fact that all the cassettes
you have been given having incorrect azimuth and Dolby levels. Because
every damn cassette in the world has incorrect azimuth and Dolby levels,
and on a lot of them the azimuth changes over the course of the tape too.
You sadly have to do the azimuth and Dolby levels by hand for each and every
tape, and it is no fun. However, you will still need to use the reference
alignment tape to reset the cassette deck back to nominal alignment after
doing this.
God, I hate cassettes.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."