On 25 Haziran, 10:59, "Sebastien @ Sundance"
<maury.sebast...@gmail.com> wrote:
> On Jun 24, 11:15*pm, recoder <kurtulmeh...@gmail.com> wrote:
>
> > *We are used to process 70 Mhz IF by using ADC boards to interface to
> > our fpga boards.
> > Now we have to process the following signal:
> > 720 Mhz IF
> > qpsk modulated
> > *80 mhz bandwith (3 dB)
>
> > Can anybody recommend a board to interface the 720 Mhz IF to a FPGA
> > board?
>
> If you are looking at a complete system, you can check the SMT702 that
> may do the job :http://www.sundance.com/web/files/pr...RFilter=SMT702
>
> - Sebastien

Thank you for your recommendation but I think downconverting 720 mhz
to 140 or 70 Mhz would be a better solution. I am looking for a board
that can do the job.