Hi,
In the board which i am doing the crosstalk analysis, has 2 traces which
are running parallel for say, "X" inches. The First trace is a power trace
which is 28V AC and Max Current on the trace is 2 A, and the proximity
trace seperated by "S" mils is the signal trace which I am interested in.
Inorder to measure the near and far end crosstalk on the signal trace in
the frequency domian, How should I model the source and load in PSpice?

Thanks,
RA


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request (AT) freelists (DOT) org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request (AT) freelists (DOT) org with 'help' in the Subject field


List technical documents are available at:
http://www.si-list.net

List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu