XC2S100 + XC9572XL
The XSA-100 Board keeps the same form-factor as our popular XS40 Boards while increasing the logic density to 100,000 gates with a Spartan-2 XC2S100 FPGA. The FPGA is combined with a 16 MByte synchronous DRAM and 256 KByte Flash to give you the resources for building a complete, soft-core RISC microcontroller system! Or anything else you might think of...
The bitstream for the XSA-100 can be stored in the on-board 256 KByte Flash so the FPGA loads its configuration as soon as power is applied. Or you can download directly to the board through the parallel port with the XSTOOLs utilities we provide. The interface CPLD on the XSA-100 also supports downloading with XILINX iMPACT and circuit test/debug with ChipScope software using our simple downloading cable. No more expensive XILINX cables!
In addition to the large FPGA, SDRAM and Flash chips, you also get a VGA port that produces vivid graphics in 64 colors. And the prototyping header gives you 53 general-purpose I/O pins for building interfaces to external devices. And you can access a variety of interfaces by inserting the XSA-100 into one of our XStend 3.0 Boards.
And the XSA-100 helps you maintain your investment. Use your existing XStend 2.1 Boards and keep your power supplies - the XSA-100 has the same power connections as the XS40 Board.
Think it will be a big switch to move from the XS40 Boards to the XSA-100? Well, we provide all the software utilities for programming the FPGA, setting the oscillator frequency, and downloading and uploading the RAM and Flash. And we make all the source code available for you to play with! How about design examples? We have parameterized modules for interfacing to the PS/2 keyboard port, displaying images through the VGA port, and reading/writing to the synchronous DRAM as if it were a simple static RAM. And we will be adapting all the chapters of our Pragmatic Logic Design online text to support the XSA-100.