iW-SDIO Slave Demo Board
iW-SDIO slave demo board can be used to evaluate SDIO to UART bridge, SDIO to USB bridge or SDIO to any custom logic / interface through expansion pins. This board also enables any designers seeking a development platform to validate their bridge cores. This versatility provides an ability to work with the SDIO bus and act as a useful bridge for target devices which require access to standard buses like UART, USB etc. The platform consists of an Actel based FPGA, UART connector, USB connector and a SDIO interface. Currently SDIO to UARTbridge have been tested and proven in this demo board.
The SDIO interface supported by the bridging applications enables a low-cost and small size implementation. A typical application include a communication link between SDIO interface and devices like UART, USB, PHS, Bluetooth, Wi-Fi, etc.
Platform Highlights:
- SDIO Slave Controller Core Available
- FPGA: Actel ProASIC3-A3P250
- Clock crystal oscillator
- Connectors and Interfaces:
- SDIO interface
- RS-232 serial port
- USB connector
- Power adapter jack
- Flashpro3 Cable JTAG connector
- FPGA I/O signals through Expansion Connectors
- UART transceiver
- USB transceiver
- 4 power LED outputs and 4 test LED outputs
Check out FPGA related videos
Find Us On Facebook
FPGA Central is a website bringing the FPGA (Field Programable Gate Array), CPLD , PLD, VLSI community together at one central location. Some Keywords: FGPA, FPGA, EDA Tools, FPGA Design, Central, Programmable logic, LUT, VLSI, SoC, Journal
Privacy Policy || Terms of Use
 |
 |