Platinum Sponsor
Featured Article
ESC - Embedded System Conference - Silicon Valley, CA
Apr 26 2010 8:00 amApr 29 2010 6:00 pmWhere:The San Jose McEnery Convention Center, San Jose, CAESC is the fastest-growing embedded event in the world, with events happening year-round in locations as Silicon Valley, Boston, India, the UK and France.
FPGA Poll & Survey
Planet FPGA - All FPGA blogs at one place
Tutorial
Virtex-II Pro PCI Express Platform
XC2VP30
Powered by Xilinx Virtex-II Pro XCV2P-30 FF1152 and supported by PCI Express IP core, the NWL-V2P-PCIE is an ideal platform for development and evaluation of f PCI Express based designs.
Features:
The default FPGA is a Virtex-2Pro 30 with a -7 speed grade. The board can also be special ordered with a
Virtex-2 Pro 50 and selected speed grade.
The board is shipped with a 256 MB DDR2 SDRAM SO-DIMM. The board can support up a 1 GB DDR2 SDRAM SO-DIMM. A custom version of the PCI Express Reference Design is needed to support any size other than 256 MB..
x8 PCI Express Connector. It can also be used x4 and x1 lane modes with a PCI Express Card Adapter.
High-speed, impedance-controlled Expansion Card Connector ( Samtec MIS-095-01-L-D-K). The Expansion Card Connector is specifically designed to support a full stream of x8 PCI Express data at 64 bits wide, 125 MHz, DDR clocking. The Expansion Card Connector can be used to attach an application-specific expansion card. An
expansion card enables the PCI Express Development Board to implement a complete three-port application (PCI
Express Port, SDRAM port, custom port). The board comes with a Loopback Connector which plugs into the Expansion Connector. The Loopback Connector is used to test the Expansion Connector during the board self -test.
Cable Header for logic analyzer or other system board. The board comes with a Loopback Cable which plugs into the Cable Header. The Loopback Cable is used to test the Cable Header during the board self -test.
JTAG Connector for programming the FPGA Configuration PROM or directly the Virtex-
2Pro. The Xilinx ChipScope tool also uses the JTAG connector.
Serial Port Connector
Power Connector (3.3V and 12 V)
FPGA Configuration PROM (XCF08P-VO48)
Upcoming FPGA Events
- Xilinx DSP Design Platforms: Achieving 1000 GMACs of DSP performance with Xilinx FPGAs(Webcast)(Now)
- FPGA Virtual Summit(Webcast)(2 days)
- Accelerating Custom IC Layout with IC Station - San Jose, CA(Event or Conferences)(7 days)
- RocketLaunch webinar(Webcast)(9 days)
- How Physical Implementation realizes Power Intent Web Seminar(Webcast)(14 days)
Copyright 2008 @ FPGA Central. All rights reserved.
FPGA Central is a website bringing the FPGA (Field Programable Gate Array), CPLD , PLD, VLSI community together at one central location.
Some Keywords: FGPA, FPGA, EDA Tools, FPGA Design, Centeral, Programmable logic, LUT, VLSI, SoC, Journal
Terms Of Use | Privacy Policy | About Us | Add to Site | Advertise with Us | Blog | Feedback | Powered By Lamingo Creator of eLagaan
  