World's 1st FPGA/CPLD Portal

The FPGA incorporates large resources, like DCMs (digital clock multipliers), Block-RAM and dedicated hardware multipliers. The supplied ready-to-use Microblaze HDL design can easily be expanded by customer-specific logic. New hardware can be attached to the module by using it's standard headers.

Features

• Linux ready (Kernel 2.4/2.6)
• Xilinx's FPGA (Spartan3, Virtex-II Pro, Virtex-4 FX)
• Network ready: 10/100 Mbps Ethernet and Linux's TCP/IP protocol stack
• Infinite Customizability
  Suzaku is based on Xilinx Virtex-II Pro Series FPGA with PowerPC processor. The FPGA offers large resources like DCMs, block RAM, and multiplier. The ready-to-use HSL design can be rounded-up by custom IP. The hardware can be extended by external circuits via standard headers.
• Linux Ready
  The board supports Linux (Kernel: Linux 2.4.x) as default operating system. Using Linux ensures a mature code base and rich software support.
• Network Ready
  The board incorporates an ethernet interface (10Base-T/100Base-TX). Using Linux network services, you can easily develop networked systems.

Specification

• Xilinx Virtex-II Pro XC2VP4 FPGA
• Ready-to-Use HDL-Design
• Linux (Kernel Version 2.4.x)
• 8 MByte FLASH
• 32 MByte DRAM
• 10Base-T/100Base-TX Ethernet
• 1 RS-232 COM Port (OPB-IP in FPGA)
• 1 Timer Unit (OPB-IP in FPGA)
• 3.6864 MHz Crystal clock at the PLL input
• 70 general purpose IO pins
• 3.3 Volt DC supply
• PCB size 72 x 47 mm (2.83 x 1.85 in)